DeepSeek V4.1 Flash Gets $100 of Usage on $10 Plans

OpenCode Go and Command Code GOAT both cost $10 a month, and both now include $100 of usage for DeepSeek V4.1 Flash. OpenCode announced it on October 30 as “Operation Cheepseek Phase 4.” Command Code says its $100 allowance is now permanent. OpenCode announcement (s'ouvre dans un nouvel onglet) · Command Code announcement (s'ouvre dans un nouvel onglet) · Command Code pricing (s'ouvre dans un nouvel onglet)

$100 is a monthly cap, not a balance you spend at once. Command Code GOAT limits usage to $20 per 5 hours and $50 per week. OpenCode Go splits each model’s monthly allowance the same way: 20% per 5 hours, 50% per week. GOAT limits (s'ouvre dans un nouvel onglet) · Go limits (s'ouvre dans un nouvel onglet)

Peak hours use it up twice as fast. V4.1 Flash costs $0.15 input and $0.60 output per million tokens off-peak, and $0.30 and $1.20 at peak. On Command Code, peak is 01:00–04:00 and 06:00–10:00 UTC, Monday to Friday. Command Code Go plan rates (s'ouvre dans un nouvel onglet)

Read the fine print. GOAT adds a processing fee on top of $10, and the $100 applies to DeepSeek V4.1 Flash only. Other models have smaller allowances. OpenCode calls this a “phase,” so it may change. Command Code ran a $100 boost earlier in October and cut it to $80 after three days. Earlier Command Code boost (s'ouvre dans un nouvel onglet)

Verdict: if you code with open models every day, either plan is now one of the cheapest ways to run DeepSeek V4.1 Flash. Pick the harness you prefer, then check the limits page before you commit.